Keep doing what you did before, play sports, be outdoors and be active the way you want. Whether you are a Pacemaker, ICD, Vagus Nerve Stimulator or Deep Brain Stimulator carrier you have one goal to not be placed on the bench.
The sport shield is made from the same D3O® material as the standard shield. The shield is made out a solid 6mm thick sheet. These sheets offer the same characteristics as the standard shield but do not offer the puncture resistant top layer. This does make the sport shield softer and more flexible.
The sport shield is compatible with our standard pacemaker, ICD, VNS and DBS shirt and shield protection. The sport shield is suitable for both left and right hand sided carriers. The sport shield must always be combined with and be placed behind the standard shield. Both shields will fit in the pocket of your shirt.
With the sport shield you have two options.
1: You place the shield as is behind the standard shield for extra cushioning and soften the contact between device and shields.
2: The sport shield is cuttable, you can use very sharp knife to cut a hole in the shield so that your device will fall into the sport shield.
This is also very useful for people of whom their device surfaces. The sport shield act as support for the standard shield.
The Shirt can be worn under your own sport shirt and team jersey or can be used as a sport shirt on its own. The shirts are available in multiple sizes for both left and right hand sided device carriers.
The recipients who bought our pacemaker and defibrillator protection solutions cited the following advantages:
D3O® offers the Vital Beat Shields the best of both worlds, soft and comfortable on the body during normal daily activities, while offering instantly and automatically an almost armored protection where needed – at the time of sudden impact.
CE – European certificate
All Shield products are CE certified.
ISO – ISO 9001 Quality
ISO 9001: 2008 certification for product quality and is applicable to the pacemaker / ICD and S-ICD Shields.
Shield tests comply with European directives EN1621 level 1 and level 2.
D3O® is a worldwide patented technology.
It is important that you execute the following 3 steps in exact same sequence, when fitting the shirt and inserting the Shields.
Step 1. Put on your shirt and make sure that it fits well. It should be a snug skin fit.
Step 2. Insert the two Shields together in the pocket of shirt with the hard dark shell towards the outside. You place the Sport Shield as is behind the Standard Shield. Make sure the Shield shape fits well the pocket shape.
Step 3. Move your hand a few times over the Shield to make sure it is placed correctly in the pocket and is lying flat against your device.
Shirt: Wash with cold or max 30C/90F water. Do not use bleach or a wash water softener. Hang to dry.
Shields: The Shields are wipe-clean only, using a damp cloth. NEVER use cleaners or detergents on or launder your Shields. This may result in irreparable damage and will reduce the effectiveness of your Shields. Do NOT use hair dryers or other heaters to dry the Shields.
Storage Shields: The Shields should be stored at room temperature, in a ventilated dry place, out of direct sunlight. Do not store under heavy objects or in extreme temperatures. If wet after use, ensure your Shield is dry before storing. Never fold your Shields.
Available for pacemaker, ICD, VNS and DBS carriers.
All our prices are exc. VAT and exc. Shipping costs.
The Sport Shield is compatible with both the right-hand side and the left-hand side compression shirt that carries the standard protection shield.
The single sport shield can only be ordered by our customers who already have the standard protections shield and shirt.
When placing the order please provide your order number and name used for your previous order.